Recommended Memory Configurations for Dell R710 - 128GB with 16GB stick

R710 Upgrade options

https://www.greenpcgamers.com/dell/dell-poweredge-rack/poweredge-11th-gen-servers/poweredge-r710-hardware-upgrade-guide-greenpcgamers-com/ Recommended Processors: *You must have a Gen II System Board to install 130W CPU’s* Up to 2 x QC Xeon X5667 3.06Ghz 12MB 6.40GTs 95W Processors | 3.46 Max Turbo Frequency (SLBVA) Up to 2 x QC Xeon X5677 3.46Ghz 12MB 6.40GTs 130W Processors | 3.73 Max Turbo Frequency (SLBV9) Up to 2 x QC Xeon X5687 3.6Ghz 12MB 6.40GTs 130W Processors | 3.86Ghz Max Turbo Frequency (SLBVY) Up to 2 x 6C Xeon X5675 3.06Ghz 12MB 6.40GTs 95W Processors | 3.46Ghz Max Turbo Frequency (SLBYL) Up to 2 x 6C Xeon X5680 3.33Ghz 12MB 6.40GTs 130W Processors | 3.60Ghz Max Turbo Frequency (SLBV5) Up to 2 x 6C Xeon X5690 3.46Ghz 12MB 6.40GTs 130W Processors | 3.73Ghz Max Turbo Frequency (SLBVX) Memory PNs: 2GB PC10600R 1Rx8 ECC Reg (093VH) 2GB PC10600R 2Rx8 ECC Reg (DP143) 4GB PC10600R 2Rx4 ECC Reg Shielded (NN876) 4GB PC10600R 2Rx8 ECC Reg (7H8J8) 4GB PC10600R 2Rx8 PC3L ECC Reg (9J5WF or H5DDH) 8GB PC10600R 2Rx4 PC3L ECC Reg (P9RN2) 8GB PC10600R 2Rx4 ECC Reg Shielded (X3R5M) 16GB PC10600R 2Rx4 PC3L ECC Reg (MGY5T) *You will need to install 2 processors to use all 18 memory slots* 4 x 8GB PC10600R ECC Reg Modules (32GB) 6 x 8GB PC10600R ECC Reg Modules (48GB) 8 x 8GB PC10600 ECC Reg Modules (64GB) 8 x 16GB PC10600R ECC Reg Modules (128GB) 12 x 16GB PC10600R ECC Reg Modules (192GB) 16 x 16GB PC10600R ECC Reg Modules (256GB) 18 x 16GB PC10600R ECC Reg Modules (288GB)

Upgraded my R710 to X5675

I bought the x5690 but it could not boot :-( wasted $70. I bought the x5675 at $60 and it is working fine. The difference between the Gen 1 and Gen 2 R710 is the CPU TDP rating it can support. The Gen1 will not support processors with a 130W TDP whilst the Gen2 will. Basically anything higher than the X5675 (X5677, X5680, X5688, X5690) is not supported on the Gen 1. The Gen 1 will support Westmere providing your BIOS is of a new enough version to support (which if it had E5620’s, then it is).

Nextcloud on TrueNas Scale with haproxy

this saved me :https://www.truenas.com/community/threads/nextcloud-redirects-to-local-ip-when-trying-to-access-from-domain.99649/#post-757130 1 Apr 23, 2023 #12 for anyone still trying to make it work with official app. I solve it by adding Nextcloud environment variables (one of 2 showed fixed it) instead of editing config.php. I ataching picture with my working conf. In case if picture wont work: Add Nextcloud enviroment in app setup or edit existing app. Name: OVERWRITEHOST and/or OVERWRITECLIURL Value: cloud.yourdomain.com