UEFI Secure Boot Issue when using older driver

OK, in previous post I followed the steps to old an older pci driver for it to recognize my SX8200 Pro drive.

Now it works but I can't boot in UEFI secure mode:






Ran some commands to check:
[root@ESXi01:~] /usr/lib/vmware/secureboot/bin/secureBoot.py -c
Secure boot CANNOT be enabled: Failed to verify signatures of the following vib(s): [nvme-pcie]. All tardisks validated. All acceptance levels validated

More information about supporting UEFI secure boot here (supported since 6.5 onwards):

https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.security.doc/GUID-5D5EE0D1-2596-43D7-95C8-0B29733191D9.html

And how to run the checks:

https://kb.vmware.com/s/article/2147606

This is the error in /var/log/esxupdate.log file

2020-07-25T17:50:08Z esxupdate: 1051169: root: DEBUG: Verifying VIB VMW_bootbank_nvme-pcie_1.2.2.13-1vmw.700.1.0.15843807 signature #1
2020-07-25T17:50:08Z esxupdate: 1051169: LiveImageInstaller: ERROR: Failed to verify checksum for payload nvme-pci: Payload checksum mismatch. Expected <60e171c3d1d712d40b82ceea5652553c0d45c
20

I am going to run in unsecure mode for now.